Austin Innovative Concrete

(512) 333-4293
Menu

Decorative Concrete Contractor in North Austin, TX

Get Free Estimate
Call Now (512) 333-4293

To Receive a Free Estimate
Fill Out This Form

Please do not fill out this form to inquire about employment. Messages received for that purpose will not be responded to. Thank you.

Por favor, no rellene este formulario para solicitar información sobre empleo. Los mensajes recibidos con ese fin no serán respondidos. Gracias.

North Austin covers two distinct markets that we constantly work across. The Domain corridor and Rundberg growth area are attracting new commercial development and multifamily construction that require polished and epoxy finishes. The established residential neighborhoods (Allandale, Crestview, Wooten, Balcones Woods) have older slabs with the mineral content that acid staining uses to its best advantage. Austin Innovative Concrete serves Austin-area concrete services across all of these neighborhoods, and North Austin accounts for a strong and consistent share of our project calendar year-round.

We specialize in stained concrete, polished floors, epoxy coatings, decorative overlays, and concrete restoration. All work is surface-applied to the existing slab (no demolition, no replacement), which keeps timelines short and projects clean for occupied North Austin homes.

Decorative Concrete Services in North Austin, TX

North Austin’s North Burnet/Gateway corridor redevelopment has driven significant new commercial and mixed-use construction over the past decade, while the Hyde Park-adjacent neighborhoods and the Rundberg area have seen sustained residential investment. That activity creates demand across all of our service lines: from epoxy garage floors in Wells Branch to interior acid staining in Allandale bungalows.

benefits-of-stained-concrete (3)

Stained Concrete Floors and Patios

Concrete staining services in North Austin follow the slab. Older slabs in Allandale, Crestview, Wooten, and Balcones Woods respond exceptionally well to acid stains, with decades of mineral accumulation producing rich, varied earth tones. Newer builds in Anderson Mill and Wells Branch are better suited to water-based stains for consistent, predictable color.

Water-based stains give predictable, repeatable color on newer North Austin slabs in Anderson Mill, Wells Branch, and the newer Domain-adjacent construction. For those surfaces, we can match a specific color to the interior palette. Bring paint chips or tile samples to the estimate, and we will walk through the options together. Most water-based stain colors are available in matte, satin, or semi-gloss finishes.

We handle interior stained floors for living rooms, kitchens, and home offices, as well as stained patios and driveways for outdoor surfaces. Most stain projects are completed in a single day.

guide-to-residential-polished-concrete-floors (2)

Polished Concrete

The newer mixed-use and commercial projects in the Domain and Rundberg corridors are strong candidates for polished concrete, low maintenance, durable underfoot traffic, and reflectivity in open commercial spaces. For Allandale and Crestview homeowners doing whole-home renovations, polishing the original slab is often significantly more cost-effective than laying new flooring.

Our polished floor options are suitable for residential and commercial applications throughout North Austin.

epoxy-flooring-design (4)

Epoxy Floor Coatings

Garage floor epoxy is a consistent request across North Austin. Wells Branch, Anderson Mill, and Metric/Braker homes typically have two-car slabs that are excellent candidates for a full UV-stable epoxy system. Our epoxy for garage floors installs in a single day and withstands Central Texas heat, oil, and vehicle traffic.

For commercial properties in the Domain and along Rundberg and North Loop, our commercial epoxy systems include solid-color, metallic, and flake options.

decorative concrete overlay in austin tx

Concrete Overlays

When a North Austin slab has surface wear that grinding can’t fully resolve, overlay and resurfacing systems provide a complete reset without removal. Common in older Allandale and Crestview homes.

austin concrete restoration

Concrete Restoration and Repair

North Austin’s older slabs (particularly in Wooten, Crestview, and north of 183) can develop cracking and surface wear over time. Our restoration and repair work covers crack injection, diamond grinding, patching, and surface prep.

Why North Austin Homeowners and Businesses Choose Austin Innovative Concrete

We’ve completed 2,500+ projects across Austin and Central Texas since 2019. North Austin’s mix of older residential neighborhoods and newer commercial growth keeps us working here year-round.

One-day installation. Most residential projects finish in a single day. Timeline confirmed in writing before we start.

Written workmanship warranty. Every project carries a written warranty on labor and workmanship.

Licensed, bonded, and insured. Full general liability and workers’ compensation on every job.

Free on-site estimates. We assess the slab in person and deliver a written quote that covers prep, materials, labor, and the timeline.

See completed work in our North Austin project gallery. 

What to Expect on Your North Austin Project

Working with Austin Innovative Concrete is a consistent process from the first call to the final walkthrough. Here is what a typical North Austin project looks like from estimate to finished surface.

Free On-Site Estimate

North Austin slabs range from 1970s and 1980s residential construction in Allandale, Crestview, and Wooten to post-2000 commercial and multifamily pours in the Domain and Wells Branch corridors. We come to your North Austin property, walk the slab, and go through your options in person. The estimate covers slab condition, prep requirements, finish type, product selection, timeline, and total cost in writing. You get the written proposal the same day or within 24 hours of our visit. We never quote over the phone or from photos.

Surface Preparation

Surface prep is what determines how long a concrete finish lasts. We diamond-grind or shot-blast the slab to create the bonding profile the finish requires. Cracks are routed, cleaned out, and filled before any coating is applied. Old adhesive, paint, and previous coatings are fully removed. On North Austin garage slabs, we conduct a moisture test before applying any epoxy system. For occupied North Austin homes, industrial vacuums and containment barriers are in place throughout all grinding and prep work to keep dust out of living spaces.

Installation Day

Most North Austin residential projects are completed in a single day. Interior stained floors, garage epoxy systems, and sealed patio surfaces are all typically one-day work. The written proposal specifies your exact project schedule before any work begins, and we confirm access details and start time with you directly.

Cure Time, Final Walkthrough, and Warranty

Sealed floors are ready for light foot traffic in 24 hours. Full epoxy systems cure in 48 to 72 hours and reach full hardness within seven days. We do a final walkthrough with you on the day the work finishes, review the surface together, and leave written aftercare instructions. Every project carries a written workmanship warranty covering labor and materials.

North Austin Areas We Serve

We serve all of North Austin, including the Domain, Rundberg, Metric/Braker corridor, Wells Branch, Anderson Mill, Balcones Woods, Allandale, Crestview, Wooten, North Loop, and the broader North Austin growth corridor between US-183 and Parmer Lane. We work in zip codes 78727, 78728, 78731, 78751, 78752, 78753, and 78757.

Our home base is Pflugerville, which puts us roughly 20 minutes from most North Austin neighborhoods. We schedule on-site estimates within 2 to 3 days and can typically have a project on the calendar within 1 to 3 weeks. For commercial jobs in the Domain corridor or along North Loop, we offer early-morning and weekend scheduling to work around business hours.

Call us at (512) 333-4293 to check availability or ask about scheduling in your neighborhood.

Frequently Asked Questions

Yes, both are areas we cover regularly. The Domain has newer commercial slabs for polished and epoxy finishes. Rundberg comprises a mix of residential and commercial properties with varying slab ages.

Acid staining is typically the strongest choice. Decades of mineral accumulation produce rich, varied colors. If the slab has surface damage, we may recommend a grind-and-overlay before staining.

Yes. Polished concrete handles foot traffic well, requires no waxing, and works well in open commercial spaces in the Domain and North Loop area.

Yes. active areas for us. Poured slabs here are excellent candidates for a full epoxy system. Most garage installs are complete in a single day.

Typically, 2 to 3 days for an estimate, 1 to 3 weeks for project start. Call (512) 333-4293 for current availability.

Call (512) 333-4293 or request an estimate online. We come to your property, assess the slab, and deliver a no-obligation written quote.

Yes to both. Garage slabs in North Austin are good candidates for epoxy and staining. Epoxy is the more durable system for vehicle traffic and the most popular choice in garages in Wells Branch and Anderson Mill. Interior staining can be done separately or as part of the same project scope.

We do not quote over the phone or from photos because the prep scope varies significantly by slab condition. An older Allandale slab with tile adhesive needs more prep than a clean newer pour in Anderson Mill, and the prep cost is part of the total. The written proposal you receive after the on-site estimate covers every cost before you commit to anything.

Acid staining reacts chemically with the minerals in the concrete to produce natural, varied colors. The result is permanent and bonds with the slab rather than sitting on top of it. Water-based stain is applied like a coat of color. It gives more predictable, uniform results and is available in a wider color range. Older South Austin slabs in 78704 have the mineral depth required for strong acid-stain results. Newer infill builds are better suited to water-based stain.

We deliver the written proposal the same day or within 24 hours of the estimate visit. Most South Austin projects are on the calendar within one to three weeks. Installation day is a single day for most interior staining work in the 78704 area. The floor is walkable in 24 hours and ready for furniture in 48 to 72 hours.

Yes. We coordinate with homeowners and general contractors on sequencing. Concrete staining and polishing happen after rough mechanical and framing work is complete and before final carpentry and cabinetry are installed. We can confirm our installation window in advance, so other trades can plan around our schedule.

Yes. If a slab has surface conditions that staining or polishing alone will not fully address, a thin bonded overlay is the right path. The overlay provides a fresh surface that can be stained, stamped, or textured. We assess overlay candidates at the estimate and explain the prep requirements and cost difference relative to direct staining.

Ready to Get Started?

Whether you’re finishing a garage floor in Wells Branch, refreshing a patio in Allandale, or resurfacing interior floors as part of a full home remodel in Crestview, we’re ready to give you a straight answer and a written quote. No pressure, no phone estimates, just a free on-site assessment and a clear proposal covering prep, materials, labor, and timeline.

We’ve completed 2,500+ projects across Austin and Central Texas. Most residential jobs start within 1 to 3 weeks.

Get Free Estimate
Call (512) 333-4293